Hardware Installations and Upgrades
10. Disconnect the main power cable from the server board (see letter "A" in the
following figure). Disconnect the IPMB cable (see letter "B"). Disconnect the P3
power supply signal cable (see letter "C"). Disconnect the reset (see letter "D") and
power switch (see letter "E") cables.
D
E
Figure 77. Disconnecting Cables from Server Board
11. Remove the IMM Pro module. For instructions, see
Module" on page
68
B
C
A
94.
"Removing the IMM Pro
Intel® Storage System SSR212CC User Guide
TP02010