Installing Dimms; Figure 102. Installing Memory - Intel SSR212CC User Manual

Installing DIMMs

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the processor air duct. For instructions, see
Duct" on page
6. Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s)
are pushed outward to the open position. Holding the DIMM by its edges, remove it
from its anti-static package.
7. Position the DIMM above the socket. Align the notch on the bottom edge of the
DIMM with the key in the DIMM socket. Insert the bottom edge of the DIMM into
the socket. Once the DIMM is inserted, push down on the top edge of the DIMM until
the retaining clips snap into place. Make sure the clips are latched firmly in place.
Intel® Storage System SSR212CC User Guide
14.
72.

Figure 102. Installing Memory

Hardware Installations and Upgrades
Appendix D, "Safety
"Removing the Enclosure Cover"
"Removing the Processor Air
DIMM 2A DIMM 2B
DIMM 3B DIMM 1A
DIMM 3A DIMM 1B
Information".
TP00761
93