Figure 99. Installing Pci Riser Assembly Into Chassis - Intel SSR212CC User Manual

Hardware Installations and Upgrades
10. Ensure the SATA cables are connected securely to the RAID controller cards and the
backplane. Install the PCI riser assembly by matching the hooks on the back of the
PCI riser assembly with the notches on the cross bar and rear of the chassis. Guide the
PCI riser assembly home by firmly gripping and sliding the assembly downwards
until the riser card mates with the connector on the server board. The latches should
lock into position once the PCI riser assembly is seated properly.

Figure 99. Installing PCI Riser Assembly into Chassis

11. Install the processor air duct over the processor on the server board. For instructions,
see
12. Install the enclosure cover. For instructions, see
page
13. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.
88
"Installing the Processor Air Duct" on page
16.
TP00876
73.
"Installing the Enclosure Cover" on
Intel® Storage System SSR212CC User Guide