Hardware Installations and Upgrades
9. Match the hooks on the back of the PCI riser assembly with the notches on the cross
bar and rear of the chassis. Slide the PCI riser assembly downwards until the PCI riser
assembly mates with the connector on the server board. Ensure that you do not pinch
any of the SATA cables. The latches should lock into position once the PCI riser
assembly is seated properly with the connector on the server board.
Figure 51. Installing PCI Riser Assembly into Chassis
10. Re-install the processor air duct. For instructions, see
Duct" on page
11. Re-install the enclosure cover. For instructions, see
on page
12. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.
46
73.
16.
"Installing the Processor Air
"Installing the Enclosure Cover"
Intel® Storage System SSR212CC User Guide
TP02055