Installing The Imm Pro Module - Intel SSR212CC User Manual

Hardware Installations and Upgrades

Installing the IMM Pro Module

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system and
programming the IMM password. Refer to the support site at
support/motherboards/server/ssr212cc
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Unlatch the two levers (see letter "A" in the following figure) on the PCI riser
assembly and lift the assembly out of the chassis (see letter "B"). Lay the PCI riser
assembly over on its side (see letter "C"). Be sure to support the PCI riser assembly so
that the connectors on the PCI riser assembly and components on the RAID controller
cards do not rub against the sheet metal of the chassis. Place a support underneath the
PCI riser assembly, next to the chassis and workbench, to minimize the stress on the
cables (see letter "D").
98
14.
http://www.intel.com/
for the appropriate firmware to use.
Appendix D, "Safety
"Removing the Enclosure Cover"
Intel® Storage System SSR212CC User Guide
Information".