Installing The System Cover; Installing A Hot-Swap Hard Disk Drive; Figure 15. Removing The System Cover; Figure 16. Installing The System Cover - Intel JBOD2000S3SP Service Manual

2.5.2

Installing the System Cover

1. Place the system cover onto the chassis and slide forward to engage recessed edge at the front of the
cover (see letter "A").
2. Tighten the four screws (see letter "B").

2.6 Installing a Hot-swap Hard Disk Drive

CAUTION: If you don't install all drives, empty drive bays must be occupied by carriers with plastic drive
blank provided to maintain proper system cooling.
Intel® Storage Server System JBOD2000S3 Service Guide

Figure 15. Removing the System Cover

Figure 16. Installing the System Cover

9