Installing The Pci Riser Assembly; Figure 24. Installing Pci Riser Assembly Into Chassis - Intel SSR212CC User Manual

12. If you need to add or replace an Intel® RAID Controller SRCS28X, see
and Installing an Intel® RAID Controller" on page
13. If you removed the PCI riser assembly as part of another procedure, continue with that
procedure.

Installing the PCI Riser Assembly

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
Caution: Do not operate the storage system without the presence of a PCI riser assembly.
1. Observe all safety and ESD precautions listed in
2. Install any necessary add-in cards into the PCI riser assembly. For instructions on
installing the Intel® RAID Controller SRCS28X, see
Controller" on page
3. Ensure the SATA cables connected to the RAID controller cards are properly
connected. Match the hooks on the back of the PCI riser assembly with the notches on
the cross bar and rear of the chassis. While routing the SATA cables through the
opening in the cross bar, guide the PCI riser assembly home by firmly gripping and
sliding the assembly downwards until the riser card mates with the connector on the
server board. The latches should lock into position once the PCI riser assembly is
seated properly.

Figure 24. Installing PCI Riser Assembly into Chassis

Intel® Storage System SSR212CC User Guide
33.
Hardware Installations and Upgrades
30.
Appendix D, "Safety Information".
"Installing an Intel® RAID
TP02055
"Removing
25