Figure 22. Disconnecting Remaining Two Sata Cables; Figure 23. Removing Pci Riser Assembly From Chassis - Intel SSR212CC User Manual

Hardware Installations and Upgrades
9. Disconnect the remaining two SATA cables connected to the backplane by pressing in
on the top and bottom latches of the connector (see letters "A" and "B" in the
following figure).

Figure 22. Disconnecting Remaining Two SATA Cables

10. Remove the tie wrap from around the SATA cables.
11. Unlatch the two levers (see letter "A" in the following figure) on the PCI riser
assembly and lift the assembly out of the chassis (see letter "B"). Guide the SATA
cables so that they clear the opening in the cross bar. Lay the PCI riser assembly on an
anti-static surface.

Figure 23. Removing PCI Riser Assembly from Chassis

24
B
C
A
D
TP02046
A
A
B
TP02043
Intel® Storage System SSR212CC User Guide