Serial Ata (Sata) Host Bus Adapter; Sata Hot Swap Backplane - Intel SS4000-E Technical Product Specification

Feature Summary
1.3

Serial ATA (SATA) Host Bus Adapter

®
The Intel Entry Storage System SS4000-E ships with one 4 port PCI-X to SATA Host Bus
Adapters. The SATA HBA provides the following feature set:
Feature
Number of ports
Serial ATA Bus Speed
Serial ATA Data Transfer rate
PCI Bus width and speed
PCI Data transfer rate
Hot Swap
RAID Management Tools
Please refer to http://www.intel.com/design/storage/serialata/docs/gd31244.htm
for more information.
1.4

SATA Hot Swap Backplane

The SATA Hot Swap backplane board provides the following feature set:
Feature
Supports up to 4
drives.
Drive Status LEDs
8
4, using a single Intel 31244 SATA controller.
1.5 Gb/s
150 MB/s
64-bit/133 MHz PCI-X bus, backward compatible to 32-bit/33 MHz and
64-bit/66 MHz (implemented in backward compatible mode)
Maximum 1.06 GB/s (backward compatible mode operates at 32-bit/33
MHz yielding maximum of 132 MB/s)
Yes
®
Yes, via Intel
Slots provided for docking up to four 1.5 Gigabits per second (Gb/s) Serial ATA
hot swap hard drives
Support for separate drive status LEDs that are visible at the front of each drive
carrier. These LED's indicate the following:
•
Green LED –
ON, Drive available
o
Blink, Drive activity
o
Off during a fault condition
o
•
Amber LED –
ON, Drive fault
o
Blink, Drive is rebuilding
o
Off during normal operation
o
Intel® Entry Storage System SS4000-E
Description
Storage Management Software using the user interface
Description
Revision 1.2