Installing The Enclosure Cover; Figure 13. Removing Enclosure Cover - Intel SSR212CC User Manual

Hardware Installations and Upgrades
3. Next, slide the enclosure cover forward (see letter "A" in the following figure) up to
the blue lid removal zone displayed on the top of the cooling module (see letter "B").
Lift the enclosure cover (see letter "C") to completely remove it from the chassis.

Installing the Enclosure Cover

Important: The enclosure cover MUST be secured to the chassis by tightening the retaining screw at
the rear of the enclosure cover.
1. Observe all safety and ESD precautions listed in
2. Align the enclosure cover over the corresponding notches in the chassis (see letter
"A" in the following figure). Slide the enclosure cover toward the front of the chassis
(see letter "B"). With a screwdriver, secure the enclosure cover to the chassis by
tightening the lock a quarter turn until the close lock symbol aligns with the notch on
the cover (see letter "C").
16
A

Figure 13. Removing Enclosure Cover

B
C
Appendix D, "Safety
Intel® Storage System SSR212CC User Guide
TP01827
Information".