Enclosure Chassis; Figure 4. Front Isometric View - Intel SSR212CC User Manual

Storage System Features
A
C

Enclosure Chassis

The chassis consists of a sheet metal enclosure assembly containing an integrated
backplane printed circuit board.
The chassis is fitted with 19-in rack-mounting features, which enables it to be fitted to
standard 19-in racks, and uses two EIA units of rack space (i.e., 3.5 in high).
The backplane printed circuit board provides 12 direct dock serial ATA connectors to the
drives and acts as the connectivity hub of the enclosure, connecting to the power supply
enclosure, cooling module, server board and serial ATA controller.
There are 12 drive bays at the front of the enclosure. Each drive bay accommodates a
plug-in drive carrier that houses low-profile (1-in) high 3.5-in form factor drives.
Note: A bay is defined as the space required to house a single 1.0-in high 3.5-in SATA disk drive
in its carrier module.
At the rear, the chassis assembly accommodates a power supply cage, a server board, and
a PCI riser card assembly.
A cover on the enclosure provides access to the cooling module and the server board sub-
system.
4
B

Figure 4. Front Isometric View

A. Front Panel
B. Drive Bays
C. Rack Retaining Screw
Intel® Storage System SSR212CC User Guide
C
TP01823