Figure 27. Connecting Third Sata Cable To Server Board - Intel SSR212CC User Manual

6. Connect the remaining SATA cable (see letter "A" in the following figure) to its
connector on the backplane (see letter "B"). Check the other SATA cables connected
to the backplane to ensure that they are properly connected and have not come loose.

Figure 27. Connecting Third SATA Cable to Server Board

7. Secure a tie wrap around the SATA cables.
8. If the PCI riser assembly is being installed as part of another procedure, continue with
that procedure.
9. Re-install the cooling module. For instructions, see
on page
10. Re-install the processor air duct. For instructions, see
Duct" on page
11. Install the enclosure cover. For instructions, see
page
12. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.
Intel® Storage System SSR212CC User Guide
A
D
54.
73.
16.
Hardware Installations and Upgrades
B
TP02054
"Installing the Cooling Module"
"Installing the Processor Air
"Installing the Enclosure Cover" on
27