Hardware Installations and Upgrades
3. (For installing a redundant power supply module only) Remove the two screws
securing the blanking plate to the chassis. Remove the blanking plate. Re-install the
two screws.
4. Push the green lever down (see letter "A" in the following figure) and slide the new
power supply module into the power supply cage (see letter "B") until it clicks into
place.
5. Plug in the AC power cable to the new power supply module.
6. On non-redundant power supply systems, power up the storage system.
20
Figure 17. Removing Blanking Plate
Figure 18. Inserting Power Supply Module
TP01848
A
B
TP01849
Intel® Storage System SSR212CC User Guide