Hardware Installations and Upgrades
8. Lower the socket lever completely.
9. The heatsink has Thermal Interface Material (TIM) located on the bottom of it. Use
caution when you unpack the heatsink so that you do not damage the TIM.
10. Set the heatsink over the processor, lining up the four captive screws with the four
posts surrounding the processor. Loosely screw in the captive screws on the heatsink
corners in a diagonal manner. Do not fully tighten one screw before tightening
another. Gradually and equally tighten each captive screw until each is firmly
tightened.
78
Figure 88. Closing Socket Lever
Figure 89. Installing the Heatsink
TP00765
TP00774
Intel® Storage System SSR212CC User Guide