Removing Or Installing The Intel® Management Module Professional (Imm Pro) Module; Removing The Imm Pro Module - Intel SSR212CC User Manual

Hardware Installations and Upgrades
8. Reinstall the processor duct. For instructions, see
on page
9. Install the enclosure cover. For instructions, see
page
10. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.
Removing or Installing the Intel® Management Module
Professional (IMM Pro) Module

Removing the IMM Pro Module

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
Caution: Before installing an IMM Pro module, ensure that the module has the correct firmware
version installed. This may require setting up the module in an external system (with a
CD-ROM or floppy drive) and updating with the appropriate firmware version. Refer to
the Intel® Storage System SSR212CC Tested Hardware and Operating System List for the
tested firmware version. Refer to the support site at http://www.intel.com/support/
motherboards/server/ism for the appropriate firmware and documentation to download.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
94
73.
16.
14.
"Installing the Processor Air Duct"
"Installing the Enclosure Cover" on
Appendix D, "Safety
"Removing the Enclosure Cover"
Intel® Storage System SSR212CC User Guide
Information".