Disk On Module (Dom) Install Guide; Tools Needed; Kit Contents; Dom Installation Instructions - Intel SSR212MA Install Manual

Disk on module (dom)

Hide thumbs Also See for SSR212MA:

Table of Contents

Disk on Module (DOM) Install Guide

The Intel® Storage System SSR212MA ships with a single 512-MB Disk on Module

(DOM) installed directly to the server board's IDE connector. The DOM is a storage

device based on flash memory technology, which emulates an ordinary magnetic hard disk

drive.

•

Flat-head screwdriver

DOM Kit (FXSDOM)

Disk on Module (DOM)

Disk on Module Install Guide

1. Read all caution and safety statements listed in this document before performing any

of the steps. See the Intel® Server Boards and Server Chassis Safety Information

document at

for a complete listing of all caution and safety statements.

Caution: Before performing any maintenance on the system, back up the data. Follow the

instructions in the Intel® Storage System Software User Manual for shutting down the

system and deactivating the DOM.

2. Turn off all peripheral devices connected to the storage system. Turn off the storage

system.

3. Disconnect the AC power cord(s).

4. Remove the DOM from its protective packaging.

Disk on Module (DOM) Install Guide: Intel® Storage System SSR212MA

Item

Quantity

http://support.intel.com/support/motherboards/server/sb/cs-010770.htm

Table of Contents