Hardware Installations and Upgrades
Installing a Hard Drive into a Drive Carrier
1. Observe all safety and ESD precautions listed in
2. See
carrier from a drive bay.
3. If replacing a hard drive, see
page 65
4. If not previously removed, remove the label from the inside of the drive carrier by
pulling up on the blue tab (see letter "A" in the following figure). Insert hard drive
into drive carrier, ensuring that the top of the hard drive faces up and the connector
end of the hard drive faces the rear of the drive carrier. Secure the hard drive to the
drive carrier with four screws (see letter "B").
B
5. For instructions on re-installing the drive carrier into the drive bay, see
Drive Carrier" on page
66
"Removing a Drive Carrier" on page 62
for instructions on removing a hard drive from a drive carrier.
Figure 76. Installing Hard Drive in Drive Carrier
63.
Appendix D, "Safety
for instructions on removing a drive
"Removing a Hard Drive from a Drive Carrier" on
Intel® Storage System SSR212CC User Guide
Information".
A
TP01829
"Installing a