Installing An Intel ® Raid Controller; Figure 33. Connecting Extended Battery Cable To Battery Backup Unit - Intel SSR212CC User Manual

Installing an Intel
Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
Caution: Refer to the support site at http://www.intel.com/support/motherboards/server/ssr212cc
for the appropriate firmware version to use.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the PCI riser assembly. For instructions, see
Assembly" on page
6. Unpack the Intel
anti-static bag and inspect for damage. Contact Intel or your Intel support
representative if the Intel
7. Configure the jumper settings on the Intel
definitions and locations in the documentation that shipped with the card.
8. Connect the extended battery cable to the battery backup unit.

Figure 33. Connecting Extended Battery Cable to Battery Backup Unit

Intel® Storage System SSR212CC User Guide
®
RAID Controller
14.
22.
®
RAID Controller. Remove the Intel
®
RAID Controller appears damaged.
Hardware Installations and Upgrades
Appendix D, "Safety
"Removing the Enclosure Cover"
"Removing the PCI Riser
®
RAID Controller from the
®
RAID Controller using the jumper
TP02339
Information".
33