Replacing An Intel ® Server Board Se7520Jr2; Removing A Server Board - Intel SSR212CC User Manual

Replacing an Intel
Caution: Before performing any maintenance on the system, back up the data.
Caution: Before installing a new server board, ensure that the server board has the correct versions
of the BIOS, FRU/SDR and mBMC installed. Refer to the support site at
www.intel.com/support/motherboards/server/ssr212cc
version to use.

Removing a Server Board

1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the cooling module. For instructions, see
on page
6. Remove the processor air duct. For instructions, see
Duct" on page
7. Remove the PCI riser assembly. For instructions, see
Assembly" on page
8. Remove the heat sink and processor. For instructions, see
on page
9. Remove the memory DIMMs. For instructions, see
Intel® Storage System SSR212CC User Guide
®
Server Board SE7520JR2
14.
51.
72.
22.
74.
Hardware Installations and Upgrades
http://
for the appropriate firmware
Appendix D, "Safety Information".
"Removing the Enclosure Cover"
"Removing the Cooling Module"
"Removing the Processor Air
"Removing the PCI Riser
"Removing the Processor"
"Removing DIMMs" on page 91.
67