Connecting The Power Cord(S); Figure 19. Connecting Power Cords - Intel SSR212CC User Manual

Connecting the Power Cord(s)

1. Observe all safety and ESD precautions listed in
2. Attach the power cord(s) to all installed power supply modules (see letter "A" in the
following figure).
Note: If power was previously interrupted, the storage system may boot up when you plug in the
AC power cord(s). If this happens, it is because the "Resume on AC Power Loss" setting
in the BIOS has been set to "Power On."
Warning:
Important: To ensure redundancy in redundant power supply systems, the two power cords must be
connected to separate and independent supplies.
3. The Power On LED on each power supply module (see letter "B") indicates whether
AC mains power is present.
Caution: The power connections must always be disconnected prior to removal of the power supply
unit from the enclosure.
Intel® Storage System SSR212CC User Guide
A
B

Figure 19. Connecting Power Cords

Hardware Installations and Upgrades
Appendix D, "Safety Information".
TP01850
21