Installing The Cooling Module; Figure 63. Accessing The Cooling Module - Intel SSR212CC User Manual

Hardware Installations and Upgrades
7. If removing the cooling module as part of another procedure, continue with that
procedure.

Installing the Cooling Module

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
Warning: Your storage system cannot run without a functional cooling module present. Do not
operate your storage system if you are unable to immediately replace a defective cooling
module. For instructions on hot swap replacing the cooling module, see
Replacing the Cooling Module" on page
1. Observe all safety and ESD precautions listed in
2. To access the cooling module location, release the lock by turning the screw a quarter
turn until the open lock symbol aligns with the notch in the chassis (see letter "A" in
the following figure). Press in on the palm latch (see letter "B"), and slide the
enclosure cover back (see letter "C") until it stops (about 2 inches), revealing the
mounting brackets for the cooling module.
54
C

Figure 63. Accessing the Cooling Module

47.
Appendix D, "Safety
B
Intel® Storage System SSR212CC User Guide
"Hot Swap
Information".
A
TP01851