Figure 104. Removing Imm Pro Module From Server Board - Intel SSR212CC User Manual

Hardware Installations and Upgrades
6. Pinch the end of the stand-off and slightly raise the IMM Pro module to disengage the
stand-off from the server board. To avoid damage to the connector, do not lift the edge
of the IMM Pro module that is farthest from the connector (near the stand-off). Grasp
the blue plastic strap (see letter "A" in the following figure) and gently pull up to
disengage the connector closest to the strap. Using your fingers, grasp the IMM Pro
module near the end of the connector and gently rock the module back and forth until
the connector is completely disengaged.

Figure 104. Removing IMM Pro Module from Server Board

7. If removing the IMM Pro module as part of another procedure, continue with that
procedure.
96
A
TP02011
Intel® Storage System SSR212CC User Guide