Installing A Pci Card; Figure 48. Removing Pci Riser Assembly From Chassis - Intel SSR212CC User Manual

19. Re-install the PCI riser assembly into the chassis. For instructions, see
PCI Riser Assembly" on page
20. Install the enclosure cover. For instructions, see
page
21. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.

Installing a PCI Card

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the processor air duct. For instructions, see
Duct" on page
6. Unlatch the two levers (see letter "A" in the following figure) on the PCI riser
assembly and lift the assembly out of the chassis (see letter "B").

Figure 48. Removing PCI Riser Assembly from Chassis

Intel® Storage System SSR212CC User Guide
16.
14.
72.
Hardware Installations and Upgrades
25.
"Installing the Enclosure Cover" on
Appendix D, "Safety
"Removing the Enclosure Cover"
"Removing the Processor Air
A
B
"Installing the
Information".
A
TP02043
43