A Intel ® Server Board Se7520Jr2 Bios Settings; Table 10. Intel® Server Board Se7520Jr2 Bios Settings - Intel SSR212CC User Manual

A Intel
BIOS Settings
Before installing a new Intel
ensure that the server board has the correct BIOS settings:
1. Connect a VGA monitor, keyboard and mouse to the storage system.
2. Power up the storage system and enter BIOS Setup by pressing <F2> at the BIOS
bootup screen.
3. Press <F9> and then select <OK> to reset the BIOS to the default BIOS settings.
4. Make modifications to the BIOS as stipulated in following table.
5. When done, select <Save Custom Defaults> from the Exit menu.
6. Select <SAVE Changes and Exit>.
Table 10. Intel® Server Board SE7520JR2 BIOS Settings
BIOS Setup Option
IDE Configuration Menu
Floppy Configuratin Sub-menu Options
Event Log Configuration Sub-menu
Selections
Intel® Storage System SSR212CC User Guide
®
Server Board SE7520JR2
®
Server Board SE7520JR2, execute the following steps to
Onboard S-ATA
Channels
On-board Floppy Controller
Clear All Event Logs
Feature
Disabled
Disabled
Enabled
Setting
117