Replacing The Server Board Battery - Intel SSR212CC User Manual

Replacing the Server Board Battery

The server board is fitted with a coin cell battery, type CR2032, located under the riser
card module.
Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
Warning: There is a danger of explosion if the battery is replaced by an incorrect type. Dispose of
used batteries in accordance with the manufacturer's instructions and National
regulations.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the processor air duct. For instructions, see
Duct" on page
Intel® Storage System SSR212CC User Guide
14.
72.
Hardware Installations and Upgrades
Appendix D, "Safety Information".
"Removing the Enclosure Cover"
"Removing the Processor Air
85