Hardware Installations and Upgrades
4. Connect the two SATA cables nearest the side of the chassis (see letters "A" and "B"
in the following figure) to their connectors on the backplane (see letter "C").
5. Connect the main P1 power cable to its connector on the server board (see letter "A"
in the following figure). When properly seated, the latch on the top of the connector
(see letter "B") should lock the connector into position.
26
A
B
Figure 25. Connecting First Two SATA Cables
Figure 26. Connecting Main Power Cable
C
TP02052
B
A
TP02053
Intel® Storage System SSR212CC User Guide