Replacing A Chassis (Fxcchassis) - Intel SSR212CC User Manual

11. Re-install and reconnect any parts you removed or disconnected to reach the
processor sockets.
12. Re-install the processor duct. For instructions, see
on page
13. Install the enclosure cover. For instructions, see
page
14. Re-connect all peripheral devices and the AC power cable. Power up the storage
system.

Replacing a Chassis (FXCCHASSIS)

Caution: Before performing any maintenance on the system, back up the data. Follow the
instructions in the operating system manual for shutting down the system.
1. Observe all safety and ESD precautions listed in
2. Turn off all peripheral devices connected to the storage system. Turn off the storage
system.
3. Disconnect the AC power cord(s).
4. Remove the enclosure cover. For instructions, see
on page
5. Remove the cooling module. For instructions, see
on page
6. Remove the processor air duct. For instructions, see
Duct" on page
7. Remove the PCI riser assembly. For instructions, see
Assembly" on page
Intel® Storage System SSR212CC User Guide
73.
16.
14.
51.
72.
22.
Hardware Installations and Upgrades
"Installing the Processor Air Duct"
"Installing the Enclosure Cover" on
Appendix D, "Safety Information".
"Removing the Enclosure Cover"
"Removing the Cooling Module"
"Removing the Processor Air
"Removing the PCI Riser
79