Figure 6. Removing Old Dom; Figure 7. Installing Replacement Dom - Intel SSR212MA Install Manual
Disk on module (dom)
Hide thumbs
Also See for SSR212MA:
- Configuration manual (10 pages) ,
- Install manual (14 pages) ,
- Technical product specification (52 pages)
Table of Contents
Advertisement
10. Remove the old DOM by pressing in on the latches on both sides of the DOM (see
letter "A" in the following figure) and pull up to remove the DOM.
11. Install the replacement DOM to the server board's IDE connector. You should feel it
snap into place.
Disk on Module (DOM) Install Guide: Intel® Storage System SSR212MA
A
Figure 6. Removing Old DOM
Figure 7. Installing Replacement DOM
Disk on Module (DOM) Install Guide
A
TP01864
TP01865
7
Advertisement
Table of Contents
