Install New Backplane Board; Figure 11. Installing The New Backplane Board In The System - Intel SSR316MJ2 Installation Manual

Installation backplane board (fmjbackplane)

Hide thumbs Also See for SSR316MJ2:

Table of Contents

Install New Backplane Board

A. Insert the new Intel

combined unit into the system. Align the holes on the bottom of the Backplane Board sheet

metal shroud onto the protruding blue pegs on the floor of the chassis. Snap the Backplane

Board and sheet metal shroud into place.

B. Align the screw holes on the backplane board with the screws holes on the steel lip. Using a

Number 1 size Phillips Screwdriver, screw in the four Phillips screws into the steel lip and

the backplane board until the backplane board is installed. See Figure 11.

C. Align the screw holes on the side of the chassis with the screws holes on the backplane

sheet metal shroud. Using a Number 1 size Phillips Screwdriver, screw in the two Phillips

screws into each side of the system until the backplane board is installed. See Figure 11.

FMJBACKPLANE Backplane Board and sheet metal shroud

Intel

Storage System SSR316MJ2 Backplane Board

Table of Contents