Front Bezel
Description
Front bezel
Bezel blank
The front bezel is held onto the computer with three tabs.
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Press outward on the three latches on the right side of the bezel (1), then rotate the right side of
the bezel off the chassis (2) followed by the left side.
Figure 6-2
4.
To remove the a bezel blank, gently twist and pull on the bezel blank until it breaks free from the
front bezel. Replacement bezel blanks are available using spare part number 622199-001
NOTE:
The appearance of the front bezel may vary.
To reinstall the front bezel, reverse the removal procedure.
(Access Panel on page
Removing the Front Bezel
(Preparation for Disassembly on page
44).
Spare part number
622203-001
622199-001
43).
Front Bezel
45