Webcam Module - Compaq 100eu - All-in-One PC Maintenance & Service Manual

Webcam module

Description
Webcam module
Webcam cable
The webcam module is mounted in a bracket located on the top of the computer (viewed from the
back). The bracket is held in place using two screws.
1. Prepare the computer for disassembly (see
on page
2. Remove the stand (see
3. Remove the hinge cover (see
4. Remove the memory/optical drive cover (see
5. Remove the outer rear cover (see
6. Remove the two PM 2.0x5.0 screws that secure the webcam bracket to the computer.
Figure 8-8
7. Lift the bracket enough to gain access to the cable connector, and the disconnect the cable from
the module.
114 Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis
106).
Stand on page
Hinge Cover on page
Removing the webcam module
Preparing to disassemble the computer
111).
112).
Memory/Optical Drive Cover on page
Rear Cover on page 113).
Spare part number
631756-001
631754-001
107).