Table of Contents
Advertisement
b.
If you are removing an expansion card, hold the card at each end and carefully rock it back
and forth until the connectors pull free from the socket. Pull the card straight up then back
to remove it.
NOTE:
attached to the expansion card.
Figure 7-18
7.
Store the removed card in anti-static packaging.
8.
If you are not installing a new expansion card, install an expansion slot cover to close the open
slot.
CAUTION:
expansion slot cover for proper cooling of internal components during operation.
94
Chapter 7 Removal and Replacement Procedures Small Form Factor (SFF) Chassis
Before removing an installed expansion card, disconnect any cables that may be
Removing an Expansion Card
After removing an expansion card, you must replace it with a new card or
Advertisement
Table of Contents
Related Manuals for Compaq 100eu - All-in-One PC
Related Products for Compaq 100eu - All-in-One PC
- Compaq 108164-003 - ProLiant - 800
- Compaq DESKPRO 1000
- Compaq 141536-002 - Deskpro EN - MT RAMBUS
- Compaq 150236-002 - Deskpro EN - 6550 Model 10000
- Compaq 154883-002 - Deskpro EN - MT 6600 Model 10000
- Compaq 154884-005 - Deskpro EN - 6600 Model 10000 CDS
- Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000
- Compaq 174381-002 - Deskpro EN - 6600 Model 10000
- Compaq 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- Compaq 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- Compaq 178930-005 - Deskpro EN - 32 MB RAM
- Compaq 179310-001 - Deskpro EN - 6350X Model 6400 CDS
- Compaq 112726-001 - ProLiant - 6500
- Compaq 124708-001 - ProLiant Cluster - 1850
- Compaq 195294-001 - ProLiant - ML370R
- Compaq 127507-008 - Deskpro EP - 64 MB RAM