Hard Drive
Description
Hard drive, 160 GB
The hard drive is secured with four screws, two on each side. The drive uses one combination data/
power connector.
1.
Prepare the computer for disassembly (see
on page
2.
Remove the stand (see
3.
Remove the hinge cover (see
4.
Remove the memory/optical drive cover (see
5.
Remove the outer rear cover (see
6.
Remove the rear metal cover (see
7.
Remove the two screws from the left side of the hard drive.
Figure 8-14
120
Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis
106).
Stand on page
Hinge Cover on page
Removing the left hard drive screws
Preparing to disassemble the computer
111).
112).
Memory/Optical Drive Cover on page
Rear Cover on page
113).
Rear Metal Cover on page
Spare part number
619967-001
107).
118).