Fan Sink
Description
Fan sink
The fan sink is secured to the system board with two screws.
1.
Prepare the computer for disassembly (see
on page
2.
Remove the stand (see
3.
Remove the hinge cover (see
4.
Remove the memory/optical drive cover (see
5.
Remove the rear cover (see
6.
Remove the rear metal cover (see
7.
Loosen the two captive silver Torx screws that secure the fan sink to the system board.
Figure 8-19
8.
Remove the fan sink from the system board.
To replace the fan sink, reverse the removal procedures.
106).
Stand on page
Hinge Cover on page
Rear Cover on page
Removing the fan sink
Preparing to disassemble the computer
111).
112).
Memory/Optical Drive Cover on page
113).
Rear Metal Cover on page
Spare part number
623377-001
107).
118).
Fan Sink
125