Table of Contents
Advertisement
9.
To install a new expansion card, hold the card just above the expansion socket on the system
board then move the card toward the rear of the chassis so that the bottom of the bracket on the
card slides into the small slot on the chassis. Press the card straight down into the expansion
socket on the system board.
Figure 7-19
Installing an Expansion Card
NOTE:
When installing an expansion card, press firmly on the card so that the whole
connector seats properly in the expansion card slot.
10.
Replace the slot cover retainer by sliding the tab on the top of the retainer behind the chassis
frame (1) then rotating the retainer into place (2).
Figure 7-20
Installing the Slot Cover Retainer
Expansion Cards
95
Advertisement
Table of Contents
Related Manuals for Compaq 100eu - All-in-One PC
Related Products for Compaq 100eu - All-in-One PC
- Compaq 108164-003 - ProLiant - 800
- Compaq DESKPRO 1000
- Compaq 141536-002 - Deskpro EN - MT RAMBUS
- Compaq 150236-002 - Deskpro EN - 6550 Model 10000
- Compaq 154883-002 - Deskpro EN - MT 6600 Model 10000
- Compaq 154884-005 - Deskpro EN - 6600 Model 10000 CDS
- Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000
- Compaq 174381-002 - Deskpro EN - 6600 Model 10000
- Compaq 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- Compaq 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- Compaq 178930-005 - Deskpro EN - 32 MB RAM
- Compaq 179310-001 - Deskpro EN - 6350X Model 6400 CDS
- Compaq 112726-001 - ProLiant - 6500
- Compaq 124708-001 - ProLiant Cluster - 1850
- Compaq 195294-001 - ProLiant - ML370R
- Compaq 127507-008 - Deskpro EP - 64 MB RAM