Access Panel
Description
Access panel
The access panel is secured with one screw.
1.
Prepare the computer for disassembly
2.
Loosen the screw (1) that secures the access panel to the computer chassis.
3.
Slide the access panel back (2) about 1.3 cm (1/2 inch), then lift it off the unit.
NOTE:
with the access panel is facing up.
Figure 6-1
To replace the access panel, reverse the removal steps.
44
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
You may want to lay the computer on its side to install internal parts. Be sure the side
Removing the Computer Access Panel
(Preparation for Disassembly on page
Spare part number
not spared
43).