Rear Cover
Description
Rear cover
The rear cover allows access to the power button board, volume board, and the rear metal cover. It is
secured with eight screws.
1.
Prepare the computer for disassembly (see
on page
2.
Remove the stand (see
3.
Remove the hinge cover (see
4.
Remove the memory/optical drive cover (see
5.
Remove the eight black Phillips PM 3.0x11.0 screws (1) that secure the cover to the computer.
The cover is connected to the computer at a seam shown by the arrows in the following image.
6.
Starting on the left side and working right, pry the cover from the computer (2).
Figure 8-7
To replace the cover, reverse the removal procedures.
106).
Stand on page
Hinge Cover on page
Removing the rear cover
Preparing to disassemble the computer
111).
112).
Memory/Optical Drive Cover on page
Spare part number
623380-001
107).
Rear Cover
113