Table of Contents
Advertisement
To verify the type, size, and capacity of the storage devices installed in the computer, run Computer
Setup.
Installing Additional Drives
When installing additional drives, follow these guidelines:
●
The hard drive must be connected to the dark blue primary SATA connector on the system
board.
●
Connect the optical drive to the white SATA connector on the system board.
●
The system does not support Parallel ATA (PATA) optical drives or PATA hard drives.
CAUTION:
If you are inserting or removing a drive, shut down the operating system properly, turn off the
computer, and unplug the power cord. Do not remove a drive while the computer is on or in standby
mode.
Before handling a drive, ensure that you are discharged of static electricity. While handling a drive,
avoid touching the connector.
Handle a drive carefully; do not drop it.
Do not use excessive force when inserting a drive.
Avoid exposing a hard drive to liquids, temperature extremes, or products that have magnetic fields
such as monitors or speakers.
If a drive must be mailed, place the drive in a bubble-pack mailer or other protective packaging and
label the package "Fragile: Handle With Care."
To prevent loss of work and damage to the computer or drive:
Drives
57
Advertisement
Table of Contents
