Table of Contents
Advertisement
8.
Remove the six silver Torx 3.0x7.0 screws that secure the system board assembly to the
computer.
NOTE:
Figure 8-21
9.
Lift the assembly from the computer.
10.
To separate the I/O board from the system board, remove the two silver Torx 3.0x7.0 screws
that secure the bracket to the I/O board, and then remove the bracket from the board.
Figure 8-22
128
Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis
Two of the screws secure the system board bracket to the computer.
Removing the system board
Removing the I/O board from the bracket
Advertisement
Table of Contents
Related Manuals for Compaq 100eu - All-in-One PC
Related Products for Compaq 100eu - All-in-One PC
- Compaq 108164-003 - ProLiant - 800
- Compaq DESKPRO 1000
- Compaq 141536-002 - Deskpro EN - MT RAMBUS
- Compaq 150236-002 - Deskpro EN - 6550 Model 10000
- Compaq 154883-002 - Deskpro EN - MT 6600 Model 10000
- Compaq 154884-005 - Deskpro EN - 6600 Model 10000 CDS
- Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000
- Compaq 174381-002 - Deskpro EN - 6600 Model 10000
- Compaq 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- Compaq 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- Compaq 178930-005 - Deskpro EN - 32 MB RAM
- Compaq 179310-001 - Deskpro EN - 6350X Model 6400 CDS
- Compaq 112726-001 - ProLiant - 6500
- Compaq 124708-001 - ProLiant Cluster - 1850
- Compaq 195294-001 - ProLiant - ML370R
- Compaq 127507-008 - Deskpro EP - 64 MB RAM