Table of Contents
Advertisement
9.
If you need to remove the heat sink bracket, remove the four Torx screws (1) that secure the
bracket to the system board, and then lift the bracket from the system board (2).
The bracket on the bottom of the system board (see following image) comes loose when you
remove the heat sink bracket screws.
To install a heat sink and heat sink bracket, reverse the removal procedures.
Heat Sink
67
Advertisement
Table of Contents
Related Manuals for Compaq 100eu - All-in-One PC
Related Products for Compaq 100eu - All-in-One PC
- Compaq 108164-003 - ProLiant - 800
- Compaq DESKPRO 1000
- Compaq 141536-002 - Deskpro EN - MT RAMBUS
- Compaq 150236-002 - Deskpro EN - 6550 Model 10000
- Compaq 154883-002 - Deskpro EN - MT 6600 Model 10000
- Compaq 154884-005 - Deskpro EN - 6600 Model 10000 CDS
- Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000
- Compaq 174381-002 - Deskpro EN - 6600 Model 10000
- Compaq 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- Compaq 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- Compaq 178930-005 - Deskpro EN - 32 MB RAM
- Compaq 179310-001 - Deskpro EN - 6350X Model 6400 CDS
- Compaq 112726-001 - ProLiant - 6500
- Compaq 124708-001 - ProLiant Cluster - 1850
- Compaq 195294-001 - ProLiant - ML370R
- Compaq 127507-008 - Deskpro EP - 64 MB RAM