System Board And I/O Board Assembly - Compaq 100eu - All-in-One PC Maintenance & Service Manual

To install a display cable, reverse the removal procedures.

System Board and I/O Board Assembly

Description
System board assembly with processor (includes replacement thermal material)
I/O board
The system board assembly includes the main system board, the I/O board, and a bracket that
secures the boards to the computer. The I/O board fits into connectors on the system board. The
assembly is mounted to the side of the computer with two screws.
1. Prepare the computer for disassembly (see
on page
2. Remove the stand (see
3. Remove the hinge cover (see
4. Remove the memory/optical drive cover (see
5. Remove the rear cover (see
6. Remove the rear metal cover (see
7. Disconnect all cables and wires from the system board.
106).
Stand on page
Hinge Cover on page
Rear Cover on page
Preparing to disassemble the computer
111).
112).
Memory/Optical Drive Cover on page
113).
Rear Metal Cover on page
System Board and I/O Board Assembly
Spare part number
619968-001
623385-001
107).
118).
127