Removing The Front Bezel - Compaq SP700 Reference Manual

6-5

Removing the Front Bezel

You will need to remove the front bezel when you are installing or removing
drives in the front bay. To remove the front bezel:
1. Turn off the workstation and disconnect the power cord from the
grounded AC outlet and the back of the workstation.
2. Remove the side access panel.
3. Refer to the following illustration to remove the front bezel.
ACT
COMP
1
2
Figure 6-2. Depressing front bezel release latches and removing front bezel
Compaq Professional Workstation SP700 Reference Guide