Table 7-2
System Board Drive Connections
No.
System Board Connector
1
SATA1
2
SATA2
Table 7-3
PowerAdapter Cable Connectors
Drive
Hard drive
Optical drive
Removing an Optical Drive
NOTE:
An optical drive is a DVD-ROM or SuperMulti LightScribe DVD-RW drive.
CAUTION:
computer.
To remove an optical drive:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Remove the front bezel
4.
Remove the two screws on the front of the chassis that secure the optical drive cage to the
chassis.
Figure 7-7
Power Cable Connector
P1
P2
All removable media should be taken out of a drive before removing the drive from the
(Access Panel on page
(Front Bezel on page
Removing the Optical Drive Screws
Color
dark blue
white
(Preparation for Disassembly on page
78).
79).
77).
Drives
87