Expansion Cards - Compaq 100eu - All-in-One PC Maintenance & Service Manual

Maintenance and service guide - compaq 100eu small form factor, 100 eu all-in-one, and 315eu microtower pcs
Hide thumbs Also See for 100eu - All-in-One PC:
Table of Contents

Advertisement

Expansion Cards

Description
Expansion cards
The computer has two PCI Express x1 expansion slots. The expansion slots accommodate full-height
or half-height expansion cards.
Expansion Slot Locations
Figure 6-5
Table 6-2
Expansion Slot Locations
Item
1
2
To remove, replace, or add an expansion card:
1.
Prepare the computer for disassembly
2.
Remove the access panel
3.
Locate the correct vacant expansion socket on the system board and the corresponding
expansion slot on the back of the computer chassis.
50
Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Expansion Slot Locations
Description
PCI Express x1 expansion slot
PCI Express x1 expansion slot
(Access Panel on page
(Preparation for Disassembly on page
44).
Spare part number
not spared
43).

Advertisement

Table of Contents
loading

This manual is also suitable for:

315eu microtower100eu small form factor

Table of Contents