Drives; Drive Positions - Compaq 100eu - All-in-One PC Maintenance & Service Manual

Drives

Description
750-GB hard drive
640-GB hard drive
500-GB hard drive
320-GB hard drive
160-GB hard drive
The computer supports up to five drives that may be installed in various configurations.
This section describes the procedure for replacing or upgrading the storage drives. A Torx T-15
screwdriver is needed to remove and install the guide screws on a drive.

Drive Positions

NOTE: Front bezel appearance may vary.
Figure 6-11
1 Two 5.25-inch external drive bays for optional drives (optical drive shown)
2 One 3.5-inch internal hard drive bay
56 Chapter 6 Removal and Replacement Procedures Microtower (MT) Chassis
Drive Positions
Spare part number
619964-001
619962-001
619963-001
619961-001
619967-001