Table of Contents
Advertisement
5.
Disconnect the front USB cable from the yellow system board connector (F_AUDIO) and the I/O
cable from the white system board connector (USB2).
6.
Remove the silver Torx screw (1) that secures the panel to the chassis.
7.
Pull the panel (2) away from the unit while guiding the wires through the hole in the front of the
chassis.
Figure 7-22
Remove the Front USB Assembly
8.
If you need to remove the front I/O board from the bracket, remove the two Torx screws (1) that
secure the board to the bracket, and then slide the board out of the bracket (2).
Figure 7-23
Removing the Front I/O Board from the Bracket
To reinstall the panel, reverse the removal procedure.
Front USB Panel
97
Advertisement
Table of Contents
Related Manuals for Compaq 100eu - All-in-One PC
Related Products for Compaq 100eu - All-in-One PC
- Compaq 108164-003 - ProLiant - 800
- Compaq DESKPRO 1000
- Compaq 141536-002 - Deskpro EN - MT RAMBUS
- Compaq 150236-002 - Deskpro EN - 6550 Model 10000
- Compaq 154883-002 - Deskpro EN - MT 6600 Model 10000
- Compaq 154884-005 - Deskpro EN - 6600 Model 10000 CDS
- Compaq 159715-002 - Deskpro EN - DT 6650 Model 10000
- Compaq 174381-002 - Deskpro EN - 6600 Model 10000
- Compaq 178910-009 - Deskpro EN - 6333 Model 4300 CDS
- Compaq 178930-002 - Deskpro EN - 6400X Model 6400 CDS
- Compaq 178930-005 - Deskpro EN - 32 MB RAM
- Compaq 179310-001 - Deskpro EN - 6350X Model 6400 CDS
- Compaq 112726-001 - ProLiant - 6500
- Compaq 124708-001 - ProLiant Cluster - 1850
- Compaq 195294-001 - ProLiant - ML370R
- Compaq 127507-008 - Deskpro EP - 64 MB RAM