Removal And Replacement Procedures All-In One (Aio) Chassis; Preparing To Disassemble The Computer - Compaq 100eu - All-in-One PC Maintenance & Service Manual

Maintenance and service guide - compaq 100eu small form factor, 100 eu all-in-one, and 315eu microtower pcs
Hide thumbs Also See for 100eu - All-in-One PC:
Table of Contents

Advertisement

8
Removal and Replacement Procedures
All-in One (AIO) Chassis
The following sections provide information about disassembling various components of the all-in-one
computer.

Preparing to disassemble the computer

To avoid injury and equipment damage, always complete the following steps in order, when opening
the computer.
1.
Remove all media (CD, DVD, etc.) from the computer.
2.
Shut down the computer.
3.
After the system has completely shut down, disconnect the power adapter from the back of the
computer.
4.
Disconnect all other attached cables from the back of the computer.
5.
Place the computer face down on a soft flat surface. HP recommends that you set down a
blanket, towel, or other soft cloth to protect the touch screen surface from scratches or other
damage.
WARNING!
106
Chapter 8 Removal and Replacement Procedures All-in One (AIO) Chassis
Beware of sharp edges inside the chassis.

Advertisement

Table of Contents
loading

This manual is also suitable for:

315eu microtower100eu small form factor

Table of Contents