Stand - Compaq 100eu - All-in-One PC Maintenance & Service Manual

Stand

Description
Stand
The stand is mounted in a fixed position on the back of the computer. It is secured with two screws.
1. Prepare the computer for disassembly (see
on page
2. Remove the two Torx screws (1) that secure the stand to the computer, and then lift the stand off
the computer (2).
Figure 8-5
To replace the stand, reverse the removal procedures.
106).
Removing the stand
Preparing to disassemble the computer
Spare part number
625595-001
Stand
111