Digital Operator Jvop-160-Oy; Digital Operator Display; Digital Operator Keys - Omron VARISPEED L7 Manual

Digital Operator JVOP-160-OY

Digital Operator Display

The key names and functions of the Digital Operator are described below

Digital Operator Keys

The names and functions of the Digital Operator Keys are described in
Key
LOCAL/REMOTE Key
MENU Key
ESC Key
JOG Key
Fig 3.2 Digital Operator Component Names and Functions
Table 3.1 Key Functions
Name
Switches between operation via the Digital Operator (LOCAL) and
the settings in b1-01 and b1-02 (REMOTE).
This key can be enabled or disabled by setting parameter o2-01.
Selects menu items (modes).
Returns to the status before the DATA/ENTER key was pressed.
Starts jog operation when the inverter is operated by the Digital
Operator and d1-18 is set to 0.
Drive Status Indicators
FWD: Lights up when a forward run command is input.
REV: Lights up when a reverse run command is input.
SEQ: Lights up when any other run command source
than the digital operator is selected
REF: Lights up when any other frequency reference
source than the digital operator is selected
ALARM:Lights up when an error or alarm has
occurred.
Data Display
Displays monitor data, parameter numbers and param-
eter settings.
Mode Display (displayed at the upper left of data display)
DRIVE: Lights up in Drive Mode.
QUICK: Lights up in Quick Programming Mode.
ADV: Lights up in Advanced Programming Mode.
VERIFY: Lights up in Verify Mode.
A. TUNE: Lights up in Autotuning Mode.
Keys
Execute operations such as setting parameters, moni-
toring, jogging, and autotuning.
Table 3.1.
Function
3
3
3-