Omron VARISPEED L7 Manual page 258

Display
OPE10
V/f Parameter Setting Error
V/f Ptrn Setting
EEPROM write error
ERR
The NV-RAM data does not match the
EEPROM R/W Err
EEPROM data.
Table 7.4 Operator Programming Errors
Meaning
V/f parameter settings were out of
range.
A verification error occurred when
writing EEPROM.
Probable Causes
Check parameters (E1-
quency/voltage value may be set
higher than the maximum fre-
quency/voltage.
Cycle power to the Inverter.
Do a factory initialization (A1-03)
Corrective Actions
). A fre-
7-
7
13